A 1.5 inch stainless welded mesh panel is a rigid grid made by welding stainless steel wires at regular intervals, with a nominal mesh spacing of 1.5 inches (38.1 mm). It is used where a durable, open barrier or support panel is needed, such as for equipment guards, partitions, shelving, and agricultural enclosures. The exact clear opening depends on the wire diameter and on whether the quoted 1.5 inches means center-to-center spacing or clear aperture. Before ordering, confirm the stainless steel grade, wire diameter, panel dimensions, edge finish, and intended environment.
If you want to learn more, please visit our website.
This guide is for procurement teams, fabricators, engineers, and project buyers evaluating stainless welded mesh panels for commercial or industrial use. It is especially useful when a drawing, project specification, or supplier quotation refers to a 1.5 inch mesh but does not fully define the panel. Our aim at Shunqiang Wire Mesh is to help buyers turn that nominal size into a clear, comparable purchase specification. Final suitability should always be checked against the project’s load, safety, and environmental requirements.
The mesh size describes the distance between wires, but suppliers and drawings may express that distance differently. A 1.5 inch measurement can refer to the wire center-to-center pitch or to the clear space between adjacent wires. Those measurements are not interchangeable, so request a dimensioned drawing or written confirmation before comparing quotations.
For example, if 38.1 mm refers to center-to-center pitch and the wire diameter is 4 mm, the theoretical clear opening is approximately 34.1 mm before manufacturing tolerances. This is an illustration, not a default product specification. The actual opening and permissible variation should be agreed with the manufacturer.
Stainless welded mesh is made by crossing longitudinal and transverse wires and welding them at their intersections. Buyers commonly ask about grades such as 304 and 316, but the appropriate selection depends on the site environment and applicable project requirements. Grade 316 includes molybdenum and is often considered for environments with greater chloride exposure; neither grade should be treated as immune to corrosion in every service condition.
Panel construction can also vary by wire diameter, panel length and width, edge treatment, and any additional framing or fabrication. A plain welded panel may suit a project where the buyer will fit it into a structure, while framed or cut-to-size panels may be preferable when the assembly requirements are defined. Ask the supplier to state which features are included in the quotation.
A useful inquiry defines more than the mesh size. The following table lists the main details to provide when requesting a quotation or technical review. If a value is not yet fixed, mark it as a requirement to be confirmed rather than assuming a standard.
| Specification | What to define | Why it matters |
|---|---|---|
| Mesh spacing | 1.5 inch (38.1 mm) pitch or clear opening | Prevents ambiguity in aperture and panel layout. |
| Wire diameter | Required diameter in millimeters or inches | Affects opening size, panel weight, and rigidity. |
| Stainless grade | Specified grade, such as 304 or 316, subject to project needs | Supports material selection for the service environment. |
| Panel dimensions | Overall width, length, and any dimensional tolerances | Helps confirm fit, shipping, and fabrication requirements. |
| Finish and edges | Surface condition, cut edges, deburring, or frame details | Clarifies handling and assembly expectations. |
Wire diameter is a key design input, but it should not be selected from mesh size alone. A heavier wire may change the clear opening and panel weight, while the required stiffness depends on panel size, support spacing, loads, and how the panel is installed. Where the mesh serves a safety or load-bearing function, have the complete assembly assessed by a qualified project professional.
The relatively open 1.5 inch pattern can be considered for applications that need a visible barrier or a supporting grid without a fine filtration surface. Potential uses include machine or equipment guarding, storage and shelving components, partitions, agricultural enclosures, and general fabrication. The mesh is not automatically suitable for every guard or enclosure: opening size, access risk, load, and local safety rules all need review.
For indoor or general-purpose settings, buyers may evaluate 304 stainless steel where its properties align with the project specification. In coastal, chemical, or otherwise chloride-exposed environments, buyers may ask about 316 or another specified alloy, while also considering cleaning practices and exposure conditions. We recommend providing a description of the actual environment to the supplier instead of selecting a grade based only on a broad label such as “outdoor use.”
If the intended job requires retaining small particles, preventing access through small openings, or creating a fine screen, a 1.5 inch mesh may be too open. A smaller aperture, expanded metal, perforated sheet, or another product type could be a better fit. Selection should follow the functional requirement rather than the product name alone.
Shunqiang Wire Mesh Product Page
Start by documenting what the panel must do: provide separation, support items, guard equipment, or form part of an enclosure. Record whether it will be exposed to moisture, cleaning chemicals, salts, heat, or impact. These details help narrow material and construction choices, but they do not replace project-specific engineering review.
State whether 1.5 inches is the pitch or clear opening, then provide wire diameter and overall panel dimensions. Include the direction of the wires if panel orientation matters to the assembly. If the panel must fit an existing frame, send a drawing showing interfaces, cut-outs, and required tolerances.
Describe edge finishing, cut-to-size needs, framing, and any packaging or marking requirements. Ask the supplier what inspection information or material documentation is available for the order, and confirm expectations before production. Where weld appearance, dimensions, or material traceability are critical, define acceptance criteria in the purchase documents.
Compare offers using the same grade, wire diameter, mesh definition, panel size, finish, and order quantity. A lower quoted price may not include the same fabrication, documentation, packaging, or delivery terms. Clarify currency, shipping basis, payment terms, and any charges for samples or custom tooling as part of the commercial review.
There is no reliable universal price for a 1.5 inch stainless welded mesh panel because material grade, wire diameter, panel size, order quantity, finishing, and shipping all affect the quotation. Minimum order quantity and production lead time also depend on the product configuration and current manufacturing schedule. We recommend requesting a project-specific offer rather than relying on a generic price per panel.
To help suppliers respond efficiently, include the quantity, delivery destination, required delivery date, and whether samples or pre-production approval are needed. If the design is flexible, identify which specifications can be adjusted, such as panel dimensions or edge treatment. This allows a supplier to discuss practical options without changing critical performance requirements.
As a wire mesh manufacturer and supplier, Shunqiang Wire Mesh can review project requirements for stainless welded mesh panels and discuss available material, dimensions, and fabrication options. Share a drawing or specification sheet where possible, along with the operating environment and required quantity. We can then assess the request and clarify which details need confirmation before quotation.
A frequent mistake is ordering by “1.5 inch mesh” alone without defining the measurement basis. Another is choosing a stainless grade without describing exposure conditions, or overlooking the way wire diameter changes the clear opening. Buyers should also avoid assuming that a panel is load-rated or compliant with a particular safety standard unless that performance has been specified and verified for the complete installation.
Unclear edge and tolerance requirements can cause problems during assembly, even when the mesh itself matches the nominal description. Confirm panel dimensions, cut-edge condition, and fit-up details before production. For critical applications, request a drawing approval step and agree on inspection criteria in advance.
A 1.5 inch stainless welded mesh panel can suit open-grid barriers, partitions, supports, and enclosures, provided its aperture, material, and construction match the application. The essential next step is to define whether 1.5 inches is the pitch or clear opening, then specify wire diameter, stainless grade, panel dimensions, finish, and service environment. Send those details with your quantity and delivery requirements to Shunqiang Wire Mesh for a project-based review and quotation. A complete specification makes product evaluation clearer and helps both buyer and supplier confirm expectations before production.
If you want to learn more, please visit our website 1.5 inch stainless welded mesh panel.